RHPL Technical Resources

Hydraulic Fittings Names Chart: Types and Identification

Updated

Use this illustrated hydraulic fittings names chart to describe a sample or prepare an enquiry. Start with the shape or component, then identify the thread and sealing family. Download the same identification sheet as a PDF for workshop reference.

Original schematic line drawings, not to scale. Hidden features are simplified. These are identification cues, not manufacturing drawings, pressure ratings or proof of interchangeability. Confirm the exact hose, fitting, seal and application before selection.

Shapes and Components

Describe the physical part and its shape first. A 90° swivel can belong to several connection families.

Straight Female Swivel

Straight Female Swivel

What It Is For: Connects an in-line hose end while the captive nut turns for assembly.

How to Recognise It: Straight stem and internal-thread nut. Identify the seat separately; an assembly swivel is not automatically a live rotary joint.

Relevant RHPL Category →
References: Parker, Parker
45° Female Swivel

45° Female Swivel

What It Is For: Turns the hose connection through 45 degrees where the route needs an angled end.

How to Recognise It: Bent tube between stem and swivel nut; confirm drop, orientation and sealing family.

Relevant RHPL Category →
References: Parker
90° Female Swivel

90° Female Swivel

What It Is For: Turns the connection through a right angle at the hose end.

How to Recognise It: L-shaped tube and captive nut. Short and long drops can have the same thread but different clearance.

Relevant RHPL Category →
References: Parker
Male Stud End

Male Stud End

What It Is For: Connects a hose or adapter to a matching threaded port.

How to Recognise It: External thread and spanner flats. Check whether sealing is at the thread, shoulder seal or specified seat.

Relevant RHPL Category →
References: Swagelok
Banjo Eye and Hollow Bolt

Banjo Eye and Hollow Bolt

What It Is For: Routes flow through an eye around a hollow bolt where a compact side connection is required.

How to Recognise It: Ring-shaped eye with a side stem; the matching bolt has fluid passages. Confirm bolt thread, eye width and seals. Identification only; ask RHPL to confirm supply.

Relevant RHPL Category →
References: Manuli
Staple-Lock Connection

Staple-Lock Connection

What It Is For: Provides a retained plug-and-socket connection used in mining hydraulic systems.

How to Recognise It: Grooved insert, matching socket and transverse retaining staple. Identify the exact interface and seal arrangement; similar staple ends are not universal.

Relevant RHPL Category →
References: Manuli
Ferrule / Crimp Socket

Ferrule / Crimp Socket

What It Is For: Secures the hose around the matched insert when crimped to its specified assembly dimensions.

How to Recognise It: Outer cylindrical sleeve over the hose. Select the exact hose, stem and ferrule system; appearance alone cannot prove compatibility.

Relevant RHPL Category →
References: Gates
Hose Insert / Nipple

Hose Insert / Nipple

What It Is For: Carries fluid from the hose bore to the machine-end connection.

How to Recognise It: Ribbed stem enters the hose; the opposite end carries the connection. Distinguish a hose insert from a male-to-male hex nipple.

Relevant RHPL Category →
References: Gates, Parker
Hex Nipple / Straight Adapter

Hex Nipple / Straight Adapter

What It Is For: Joins two identified connections in a straight arrangement.

How to Recognise It: Two externally threaded ends separated by a hexagon for a spanner. Record both ends, even when they look alike. Identification only; confirm the requested type with RHPL.

Relevant RHPL Category →
References: Parker
Tee Adapter

Tee Adapter

What It Is For: Creates a three-way junction between specified interfaces.

How to Recognise It: T-shaped body with three connection ends. Specify the run and branch separately, including thread, seal and size.

Relevant RHPL Category →
References: Parker
Elbow Adapter

Elbow Adapter

What It Is For: Changes direction between a port, tube or hose connection without being a crimped hose end.

How to Recognise It: Rigid angled body with two connection interfaces. Identify each end and whether the port end is adjustable.

Relevant RHPL Category →
References: Parker

Thread and Sealing Families

Identify the thread and the sealing interface separately. The schematic views below highlight the seal or retention feature; they are not dimensional cross-sections.

JIC 37° Flare37°

JIC 37° Flare

What It Is For: Joins matching flared interfaces with a metal-to-metal sealing seat.

How to Recognise It: Parallel UN/UNF thread with the JIC flare seat. Verify 37 degrees with a seat gauge; a similar 45-degree seat is a different interface.

Relevant RHPL Category →
References: Parker
ORFS - O-Ring Face Seal

ORFS - O-Ring Face Seal

What It Is For: Seals against a flat mating face by compressing an O-ring in the male end face.

How to Recognise It: Flat face with a visible O-ring groove on the male end, rather than a flare cone. Match thread, face and seal size.

Relevant RHPL Category →
References: Parker
BSP 60° Cone60°

BSP 60° Cone

What It Is For: Uses a BSP parallel threaded swivel connection with the specified cone seat.

How to Recognise It: Internal cone at the male end and matching female swivel nose. BSPP describes the thread; it does not establish the seal. Do not confuse with BSP taper or flat-seat versions.

Relevant RHPL Category →
References: Parker, Swagelok
DIN 24° Light Series - DKOL24°L

DIN 24° Light Series - DKOL

What It Is For: Connects a matching metric 24-degree light-series interface using the O-ring cone hose end.

How to Recognise It: Metric swivel nut and O-ring on the cone. Confirm L series, tube-size designation, thread and seat; DKOL and DKOS are not selected by nut size alone.

Relevant RHPL Category →
References: Parker
DIN 24° Heavy Series - DKOS24°S

DIN 24° Heavy Series - DKOS

What It Is For: Connects a matching metric 24-degree heavy-series interface using the O-ring cone hose end.

How to Recognise It: Metric swivel nut and O-ring on the cone. Confirm S series, tube-size designation, thread and seat; DKOL and DKOS are not selected by nut size alone.

Relevant RHPL Category →
References: Parker
Metric Thread - Specify the SeatMpitch

Metric Thread - Specify the Seat

What It Is For: Identifies a metric thread system used with several different sealing arrangements.

How to Recognise It: An M diameter-by-pitch designation is only part of the description. Inspect the actual cone, face or port seal; metric does not automatically mean DIN 24 degrees.

Relevant RHPL Category →
References: Swagelok, Parker
NPT Taper Pipe Thread

NPT Taper Pipe Thread

What It Is For: Connects mating tapered pipe threads with the specified sealing procedure.

How to Recognise It: Thread diameter tapers along the end. Verify diameter and pitch against NPT data; BSPT and NPT are different. Do not assume NPTF and NPT requirements are identical.

Relevant RHPL Category →
References: Swagelok
SAE Flange - Code 61Code 61

SAE Flange - Code 61

What It Is For: Uses a flange head, O-ring and four-bolt clamp arrangement in the standard-pressure series.

How to Recognise It: Identify the code using flange-head diameter and thickness, bolt pattern and the manufacturer drawing. Code 61 and Code 62 are distinct; the schematic is not a size or pressure rating.

Relevant RHPL Category →
References: Parker
SAE Flange - Code 62Code 62

SAE Flange - Code 62

What It Is For: Uses a flange head, O-ring and four-bolt clamp arrangement in the high-pressure series.

How to Recognise It: Identify the code using flange-head diameter and thickness, bolt pattern and the manufacturer drawing. Code 61 and Code 62 are distinct; the schematic is not a size or pressure rating.

Relevant RHPL Category →
References: Parker

Hydraulic Fitting Size Identification Checklist

A fitting name is not a size. Record the following details before using a hydraulic fitting size chart; nominal hose bore and measured thread diameter describe different features.

Threaded Ends

Record: Male thread outside diameter (or female internal diameter), pitch in mm or TPI, parallel or tapered form, and sealing face.

Check: Match a named thread standard and the manufacturer size row; hose bore and thread diameter are different measurements.

Swivels and Elbows

Record: Thread and seat, straight/45°/90° shape, drop length and end orientation.

Check: A swivel nut helps assembly; it does not imply continuous rotation in service.

Metric DIN Ends

Record: Thread diameter and pitch, tube-size designation, L/S series and O-ring cone.

Check: Identify DKOL or DKOS from the full interface, not just the spanner size.

Flange Ends

Record: Head diameter and thickness, bolt spacing, nominal size and code.

Check: Use the correct Code 61/62 drawing; do not infer a code from the illustration.

Hose-Side Components

Record: Hose manufacturer, series and bore; exact insert and ferrule identification.

Check: Use the manufacturer-approved combination and crimp specification.

Frequently Asked Questions

Can I Download a Hydraulic Fittings Names PDF?

Yes. The free RHPL PDF contains the same 20 illustrated entries and identification notes as this page, with links to the relevant categories.

Is This a Hydraulic Fitting Size Chart?

It is a names and identification chart with a measurement checklist. Numeric thread dimensions belong in the thread-specific chart. Hose bore, thread nominal size and measured diameter are not interchangeable.

Are Straight, 45° and 90° Different Thread Types?

No. Those names describe shape. Any enquiry must separately identify the thread, seal, size and male or female form.

Does a Similar Thread Mean Two Fittings Will Seal?

No. Threads can look similar while pitch, taper, seat or seal location differ. Check both mating interfaces against the specified connection standard.

Does Every Illustrated Type Mean RHPL Has It in Stock?

No. This is an identification reference. Send the exact specification and quantity for supply confirmation, especially for banjo and hex-nipple requests.

Send Photos and Dimensions for Identification

Send clear end-face and side-view photographs, measurements, any markings, quantity and delivery location. Describe both ends of an adapter separately. RHPL will review the requested specification and supply availability.

Download the Hydraulic Fitting Types PDF

Technical References

The named manufacturer references support identification terminology. The line drawings are original RHPL schematics. Refer to the exact manufacturer drawing for dimensions and suitability.

Manufacturer names identify reference sources only and do not imply endorsement. This guide does not establish interchangeability or an assembly pressure rating.

Have a Drawing or a Sample?

Share the dimensions and service conditions for technical review.

Ask Our Technical Team