Semperit Hydraulic Hose Assemblies
RHPL builds hydraulic hose assemblies with Semperit hose on request in Raipur. Send the complete layline, end details and drawing for a replacement enquiry.
Archived Semperflex reports document impulse-test results for selected assemblies built with RHPL-produced fittings. View Documented Impulse-Test Results
Wire Braid Hydraulic Hoses
Explore Semperit wire braid hydraulic hoses by family and listed size.
24 size and variant references · 5 hose families
Browse Hose FamiliesSEMPERIT · HYDRAULIC HOSESCompact Hydraulic Hoses
Explore Semperit compact hydraulic hoses by family and listed size.
21 size and variant references · 3 hose families
Browse Hose FamiliesSEMPERIT · HYDRAULIC HOSESMulti-Spiral Hydraulic Hoses
Explore Semperit multi-spiral hydraulic hoses by family and listed size.
22 size and variant references · 4 hose families
Browse Hose Families67 size and variant references · 12 hose families
Semperit Hydraulic Hose Assemblies Built on Request
RHPL builds hose assemblies with Semperit hose on request at Raipur. Send an identified requirement for an individual replacement or a planned group of assemblies. We review the hose reference together with the end connections, drawing and service conditions before confirming the proposed build. RHPL manufactures the finished assembly and its agreed fittings; the Semperit name identifies the hose used.
A replacement enquiry should describe the complete assembly. The brand printed on the cover is useful, but it does not define the fittings or the installed geometry. If a previous assembly has been modified, explain the changes and identify which drawing, sample or order reference should govern the new requirement.
Identify Semperit Hose from the Layline
The layline is the printed identification along the hose cover. Photograph a readable length and copy the Semperit name and complete series or product designation exactly as printed. Include markings such as 2SN or 4SH only when they appear on your hose; these examples are identification terms, not a selection recommendation.
Keep suffixes, separators and additional printed markings in the enquiry. Several overlapping photographs are more useful than one distant image of the coil. If characters are damaged or missing, say so instead of completing the number from memory. Include any assembly tag separately: a hose designation and an assembly reference may identify different things.
What to Send for a Replacement
- The complete layline transcription and clear photographs of the hose marking.
- The old assembly reference, drawing revision or identified sample, if available.
- Photographs of both ends, including the threads, sealing faces and fitting form.
- The overall assembly measurement, its measurement points and the relative orientation of the ends.
- The operating fluid, service conditions, routing constraints and any reported problem.
- The quantity of finished assemblies, destination and required receiving date.
Label the connections End A and End B consistently across photographs and drawings. Include a view of the full assembly so bends, protection and identification can be discussed together. Our hose length measurement guide explains how to state the measurement clearly, while the fitting identification guide helps organise connection details.
Use Existing Semperit References
The catalogue links above help locate an identified family. Existing part pages include the Semperit 2SN reference and Semperit 4SH Premium reference. Use these only when their complete designation matches your requirement; neighbouring entries are not automatic substitutes.
For the finished product, see RHPL hydraulic hose assemblies. A catalogue match is a starting point for review. The quotation confirms the proposed assembly configuration, quantity, inspection scope and delivery schedule. Keep the accepted reference with your maintenance records to make a later repeat enquiry easier to identify.
Semperit Hose Assembly FAQs
Can RHPL build an assembly using Semperit hose?
Yes. RHPL builds hose assemblies with Semperit hose on request. Send the exact hose identification, assembly drawing or sample, end details and quantity. The proposed hose, compatible fittings and finished configuration are confirmed for the enquiry before manufacture.
Is a 2SN or 4SH marking enough to identify my replacement?
No. Copy those characters if they appear on the layline, but include the Semperit name, complete series or product designation and all remaining markings. The hose identification alone does not define the end connections, assembly length or installation requirement.
What if the Semperit layline is worn or incomplete?
Send photographs of every readable section, the complete assembly, both fittings and any separate identification tag. Add a drawing or previous order reference if available. Mark uncertain characters as unknown so RHPL can request the missing information before proposing a replacement.
Semperit is a trademark of its owner, used for hose identification; no affiliation implied.
Request a Semperit Assembly Contact RHPLLast updated:
