RHPL supplies Gates, Danfoss and Semperit hydraulic and industrial hoses from Raipur and is an Authorised Gates Distributor. We also manufacture finished hose assemblies. Send your hose designation and quantity on WhatsApp +91 88717 39555.
Choose a hydraulic hose by its exact manufacturer reference and intended service, then confirm whether you need bare hose or a finished assembly. This page brings the Gates, Semperit and Danfoss catalogue routes together so you can start with a recognised family instead of comparing unrelated products by appearance. RHPL is an Authorised Gates Distributor in Raipur, Chhattisgarh. Manufacturer catalogue information describes the listed product; the quotation confirms the item proposed for your enquiry.
For a repeat purchase, send the full hose designation or part number, preserving every suffix. Add the quantity in Meter for bare hose and the delivery destination. A clear photograph of the hose layline helps identify a reference, but an unreadable marking should be reported as unknown. If the previous product or installation has changed, explain that change before asking for a repeat supply. Different catalogue families are not interchangeable simply because their names or nominal sizes look similar.
For a new requirement, provide the application and operating information privately with your enquiry. The manufacturer selection guidance and the applicable product entry are the starting points for review. A hose family description does not confirm a complete assembly: connections, preparation and the accepted hose-and-fitting system must also be checked. Use the hydraulic hose assembly page when you need a finished component, or the machine-kit directory when the request concerns several replacements for one machine.
Open Gates for its published hose and coupling references, Semperit for the listed hydraulic hose families, and Danfoss for its hose and fitting catalogue routes. The detailed pages preserve public manufacturer information while RHPL assembly specifications remain private. If you cannot locate the exact reference, send it through Request a Quote or WhatsApp +91 88717 39555 rather than selecting the nearest-looking number. Include your required date: normal-order dispatch is 4–6 days, subject to confirmation for the item and quantity, with freight extra. RHPL reviews availability and the accepted supply scope in writing.
Recognisable products. Separate catalogues. A clear route to the right hose.
Explore Gates hydraulic and industrial hose ranges, with couplings and manufacturer catalogue references. Identify the hose family first, then confirm the compatible coupling system and current crimp specification.
Explore Gates Catalogue
Browse Danfoss hose and fitting references, including braided and spiral hose families. Skive, no-skive and reusable fitting systems have different assembly requirements; selection must follow the exact hose-and-fitting combination.
Explore Danfoss Catalogue
Explore Semperit hydraulic hose families and size-specific catalogue information. Review reinforcement, bend radius, temperature and fluid compatibility for the duty. Couplings and assembly parameters require separate compatibility confirmation.
Explore Semperit CatalogueManufacturer imagery identifies the product range; cutaways show construction, not a finished skived assembly. Confirm the exact catalogue reference and supply availability in your quotation.
Review wire-braid or spiral-wire construction, fluid compatibility, working pressure including peaks, fluid and ambient temperature, flow requirement and minimum bend radius.
Hydraulic Hose SelectionIdentify air, water, petroleum, chemical, steam or material-handling duty. Confirm the medium, concentration where relevant, temperature, suction or discharge conditions, and compatible connections.
Industrial Hose SelectionConfirm the complete hose-and-coupling system, connection and sealing type, routing and measured assembly requirements. BSP, JIC, ORFS and SAE flange interfaces require positive identification.
Hose Assembly EnquiriesSAE J517 and EN 853 / EN 856 / EN 857 are useful catalogue references. Check the standard stated for the exact hose family and size; a standard designation alone does not approve an assembled hose for your service.
Skiving removes a specified layer of the cover and/or inner tube at the hose end only when the coupling system requires it. A no-skive system retains those layers as specified. Neither method can be selected just by how the hose looks.
Crimping compresses the ferrule around the hose and fitting stem using the specified tooling and dimensions. In a finished assembly, the ferrule covers the retention area. A layered catalogue cutaway is a construction illustration, not the appearance to copy after assembly.
Hydraulic hose transmits fluid power in a hydraulic circuit. Industrial hose carries media such as air, water, chemicals, steam or abrasive material. The service, medium, temperature, pressure or vacuum, and connection system determine the correct product; the two categories are not interchangeable.
No. Skiving is required only where the selected hose-and-coupling system specifies it. Gates GlobalSpiral is a no-skive system, while Danfoss offers both skive and no-skive options. Use the current manufacturer assembly instructions for the exact combination.
Matching nominal size or thread does not prove hose-to-fitting compatibility. Use a combination validated for the intended service, with its specified preparation, insertion depth, tooling and crimp parameters. Confirm compatibility before manufacture.
Send the manufacturer and exact hose or part reference, quantity and destination. Include the fluid, working conditions and installation details. For a finished assembly, send connection photographs, a drawing or an identified sample through the private enquiry form.
No. Burst pressure is a test value, not a permissible working pressure. Select for the rated working pressure and expected pressure peaks. The complete assembly rating must respect the lowest-rated component and any applicable service derating.
Share the brand, part number, quantity and destination. Add drawings or assembly photographs through the enquiry form.
Selected RHPL assembly configurations have documented impulse-test results. View Documented Impulse-Test Results
Technical references: Gates Coupling Systems · Danfoss Hose & Fitting Systems · Semperit Hose Selection.
Gates, Danfoss and Semperit names and manufacturer images belong to their respective owners and identify the referenced product ranges.
One part, a complete kit or a list from Excel—all in one enquiry.
