Semperit R19
Wire-braided hydraulic hose listed in DN 19, 3/4 inch. This size has a working pressure of 280 bar and minimum bend radius of 120 mm.
RHPL has worked with Semperit hoses for approximately ten years. Our Raipur team supports hydraulic hose selection and assembly enquiries. Confirm the exact size, quantity and current stock availability with us.
1 size and variant references · 1 hose families
R19
Wire-braided hydraulic hose listed in DN 19, 3/4 inch. This size has a working pressure of 280 bar and minimum bend radius of 120 mm.
Standards: Confirm the current manufacturer standard with RHPL.
DN 19 mm · 3/4 inch · Working pressure 280 bar · Burst pressure 1120 bar · Minimum bend radius 120 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| R19 | 19 | 3/4 | 280 | 1120 | 120 | Meter | View R19 DN 19 |
Why Semperit through RHPL
Order Semperit hoses through RHPL as an authorised hose distributor. We support technical selection and crimped assembly enquiries, confirming the proposed hose and compatible fittings before supply.
Select against the exact hose size, working pressure and minimum bend radius. Confirm fluid compatibility, operating temperature and the approved hose/fitting combination with RHPL before ordering. Burst pressure is not an operating pressure or a proof-test instruction.
Typical delivery is 4–6 days, confirmed against product, quantity and availability.
Enquire about Semperit hoses Contact RHPLSemperit is a trademark of its owner. RHPL’s Semperit distributor representation here covers hoses.