Semperit Hydraulic Hose Catalogue
Choose a hydraulic hose chapter, then select a family and exact size for technical information and an enquiry.
RHPL has worked with Semperit hoses for approximately ten years. Our Raipur team supports hydraulic hose selection and assembly enquiries. Confirm the exact size, quantity and current stock availability with us.
Wire Braid Hydraulic Hoses
Explore Semperit wire braid hydraulic hoses by family and listed size.
SEMPERIT · HYDRAULIC HOSESCompact Hydraulic Hoses
Explore Semperit compact hydraulic hoses by family and listed size.
SEMPERIT · HYDRAULIC HOSESMulti-Spiral Hydraulic Hoses
Explore Semperit multi-spiral hydraulic hoses by family and listed size.
67 size and variant references · 12 hose families
1SN / SAE 100 R1
Single-wire-braid hydraulic hose. Compare each listed size for its working pressure and minimum bend radius.
Standards: EN 853 · SAE 100R · ISO 1436
DN 6–51 mm · 1/4–2 inch · Working pressure 40–225 bar · Burst pressure 160–900 bar · Minimum bend radius 100–630 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| 1SN/ SAE 100 R1 | 6 | 1/4 | 225 | 900 | 100 | Meter | View 1SN/ SAE 100 R1 DN 6 |
| 1SN/ SAE 100 R1 | 8 | 5/16 | 215 | 860 | 115 | Meter | View 1SN/ SAE 100 R1 DN 8 |
| 1SN/ SAE 100 R1 | 10 | 3/8 | 180 | 720 | 125 | Meter | View 1SN/ SAE 100 R1 DN 10 |
| 1SN/ SAE 100 R1 | 12 | 1/2 | 160 | 640 | 180 | Meter | View 1SN/ SAE 100 R1 DN 12 |
| 1SN/ SAE 100 R1 | 16 | 5/8 | 130 | 520 | 200 | Meter | View 1SN/ SAE 100 R1 DN 16 |
| 1SN/ SAE 100 R1 | 19 | 3/4 | 105 | 420 | 240 | Meter | View 1SN/ SAE 100 R1 DN 19 |
| 1SN/ SAE 100 R1 | 25 | 1 | 88 | 352 | 300 | Meter | View 1SN/ SAE 100 R1 DN 25 |
| 1SN/ SAE 100 R1 | 31 | 1 1/4 | 63 | 252 | 420 | Meter | View 1SN/ SAE 100 R1 DN 31 |
| 1SN/ SAE 100 R1 | 38 | 1 1/2 | 50 | 200 | 500 | Meter | View 1SN/ SAE 100 R1 DN 38 |
| 1SN/ SAE 100 R1 | 51 | 2 | 40 | 160 | 630 | Meter | View 1SN/ SAE 100 R1 DN 51 |
2SN / SAE 100 R2
Two-wire-braid hydraulic hose. Ratings vary by nominal bore; choose the exact size for your hydraulic circuit.
Standards: EN 853 · SAE 100R · ISO 1436
DN 6–51 mm · 1/4–2 inch · Working pressure 80–400 bar · Burst pressure 320–1600 bar · Minimum bend radius 100–630 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| 2SN/ SAE 100 R2 | 6 | 1/4 | 400 | 1600 | 100 | Meter | View 2SN/ SAE 100 R2 DN 6 |
| 2SN/ SAE 100 R2 | 8 | 5/16 | 350 | 1400 | 115 | Meter | View 2SN/ SAE 100 R2 DN 8 |
| 2SN/ SAE 100 R2 | 10 | 3/8 | 330 | 1320 | 125 | Meter | View 2SN/ SAE 100 R2 DN 10 |
| 2SN/ SAE 100 R2 | 12 | 1/2 | 275 | 1100 | 180 | Meter | View 2SN/ SAE 100 R2 DN 12 |
| 2SN/ SAE 100 R2 | 16 | 5/8 | 250 | 1000 | 200 | Meter | View 2SN/ SAE 100 R2 DN 16 |
| 2SN/ SAE 100 R2 | 19 | 3/4 | 215 | 860 | 240 | Meter | View 2SN/ SAE 100 R2 DN 19 |
| 2SN/ SAE 100 R2 | 25 | 1 | 165 | 660 | 300 | Meter | View 2SN/ SAE 100 R2 DN 25 |
| 2SN/ SAE 100 R2 | 31 | 1 1/4 | 125 | 500 | 420 | Meter | View 2SN/ SAE 100 R2 DN 31 |
| 2SN/ SAE 100 R2 | 38 | 1 1/2 | 90 | 360 | 500 | Meter | View 2SN/ SAE 100 R2 DN 38 |
| 2SN/ SAE 100 R2 | 51 | 2 | 80 | 320 | 630 | Meter | View 2SN/ SAE 100 R2 DN 51 |
2SC / R16S
Compact two-wire-braid hydraulic hose with listed bend radii from 50 to 150 mm. Review the size-specific ratings for routing and selection.
Standards: EN 857 · SAE 100 R16
DN 6–25 mm · 1/4–1 inch · Working pressure 165–400 bar · Burst pressure 660–1600 bar · Minimum bend radius 50–150 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| 2SC/ R16S | 6 | 1/4 | 400 | 1600 | 50 | Meter | View 2SC/ R16S DN 6 |
| 2SC/ R16S | 8 | 5/16 | 350 | 1400 | 55 | Meter | View 2SC/ R16S DN 8 |
| 2SC/ R16S | 10 | 3/8 | 330 | 1320 | 65 | Meter | View 2SC/ R16S DN 10 |
| 2SC/ R16S | 12 | 1/2 | 275 | 1100 | 90 | Meter | View 2SC/ R16S DN 12 |
| 2SC/ R16S | 16 | 5/8 | 250 | 1000 | 100 | Meter | View 2SC/ R16S DN 16 |
| 2SC/ R16S | 19 | 3/4 | 215 | 860 | 120 | Meter | View 2SC/ R16S DN 19 |
| 2SC/ R16S | 25 | 1 | 165 | 660 | 150 | Meter | View 2SC/ R16S DN 25 |
Semperpac 1SNK
Compact one-wire-braid Semperpac range, described with higher pressure, higher impulse and reduced bend radii. Use the listed size-specific values.
Standards: Confirm the current manufacturer standard with RHPL.
DN 6–25 mm · 1/4–1 inch · Working pressure 110–290 bar · Burst pressure 440–1160 bar · Minimum bend radius 40–160 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| Semperpac 1SNK | 6 | 1/4 | 290 | 1160 | 40 | Meter | View Semperpac 1SNK DN 6 |
| Semperpac 1SNK | 8 | 5/16 | 250 | 1000 | 55 | Meter | View Semperpac 1SNK DN 8 |
| Semperpac 1SNK | 10 | 3/8 | 230 | 920 | 65 | Meter | View Semperpac 1SNK DN 10 |
| Semperpac 1SNK | 12 | 1/2 | 200 | 800 | 80 | Meter | View Semperpac 1SNK DN 12 |
| Semperpac 1SNK | 16 | 5/8 | 150 | 600 | 105 | Meter | View Semperpac 1SNK DN 16 |
| Semperpac 1SNK | 19 | 3/4 | 125 | 500 | 120 | Meter | View Semperpac 1SNK DN 19 |
| Semperpac 1SNK | 25 | 1 | 110 | 440 | 160 | Meter | View Semperpac 1SNK DN 25 |
Semperpac 2SNK
Compact two-wire-braid Semperpac range. Compare bore, pressure and bend radius before selecting a hose for a constrained routing space.
Standards: Confirm the current manufacturer standard with RHPL.
DN 6–25 mm · 1/4–1 inch · Working pressure 200–450 bar · Burst pressure 800–1800 bar · Minimum bend radius 45–210 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| Semperpac 2SNK | 6 | 1/4 | 450 | 1800 | 45 | Meter | View Semperpac 2SNK DN 6 |
| Semperpac 2SNK | 8 | 5/16 | 420 | 1680 | 60 | Meter | View Semperpac 2SNK DN 8 |
| Semperpac 2SNK | 10 | 3/8 | 385 | 1540 | 70 | Meter | View Semperpac 2SNK DN 10 |
| Semperpac 2SNK | 12 | 1/2 | 350 | 1400 | 90 | Meter | View Semperpac 2SNK DN 12 |
| Semperpac 2SNK | 16 | 5/8 | 290 | 1160 | 130 | Meter | View Semperpac 2SNK DN 16 |
| Semperpac 2SNK | 19 | 3/4 | 280 | 1120 | 160 | Meter | View Semperpac 2SNK DN 19 |
| Semperpac 2SNK | 25 | 1 | 200 | 800 | 210 | Meter | View Semperpac 2SNK DN 25 |
R19
Wire-braided hydraulic hose listed in DN 19, 3/4 inch. This size has a working pressure of 280 bar and minimum bend radius of 120 mm.
Standards: Confirm the current manufacturer standard with RHPL.
DN 19 mm · 3/4 inch · Working pressure 280 bar · Burst pressure 1120 bar · Minimum bend radius 120 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| R19 | 19 | 3/4 | 280 | 1120 | 120 | Meter | View R19 DN 19 |
Semper Jack
High-pressure wire-braided jack hose listed in DN 6 and DN 10. Both listed sizes have a working pressure of 700 bar.
Standards: Confirm the current manufacturer standard with RHPL.
DN 6–10 mm · 1/4–3/8 inch · Working pressure 700 bar · Burst pressure 2800 bar · Minimum bend radius 75–90 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| SEMPER JACK | 6 | 1/4 | 700 | 2800 | 75 | Meter | View SEMPER JACK DN 6 |
| SEMPER JACK | 10 | 3/8 | 700 | 2800 | 90 | Meter | View SEMPER JACK DN 10 |
210 Semperloader
Wire-braided hose listed in DN 25, 1 inch, with a working pressure of 210 bar. Confirm the proposed hydraulic service before supply.
Standards: Confirm the current manufacturer standard with RHPL.
DN 25 mm · 1 inch · Working pressure 210 bar · Burst pressure 840 bar · Minimum bend radius 150 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| 210 SEMPERLOADER | 25 | 1 | 210 | 840 | 150 | Meter | View 210 SEMPERLOADER DN 25 |
4SP
Multi-spiral hydraulic hose in DN 10 to DN 25. Working pressures range from 320 to 450 bar across the listed sizes.
Standards: Confirm the current manufacturer standard with RHPL.
DN 10–25 mm · 3/8–1 inch · Working pressure 320–450 bar · Burst pressure 1280–1800 bar · Minimum bend radius 125–340 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| 4SP | 10 | 3/8 | 450 | 1800 | 125 | Meter | View 4SP DN 10 |
| 4SP | 12 | 1/2 | 425 | 1700 | 230 | Meter | View 4SP DN 12 |
| 4SP | 16 | 5/8 | 350 | 1400 | 250 | Meter | View 4SP DN 16 |
| 4SP | 19 | 3/4 | 350 | 1400 | 300 | Meter | View 4SP DN 19 |
| 4SP | 25 | 1 | 320 | 1280 | 340 | Meter | View 4SP DN 25 |
FL5000
Flexible multi-spiral compact hose covering FL5000, FL5000 - 4S and FL5000 - 6S. DN 38 has two distinct variants with different bend radii.
Standards: Confirm the current manufacturer standard with RHPL.
DN 16–51 mm · 5/8–2 inch · Working pressure 350–380 bar · Burst pressure 1400–1520 bar · Minimum bend radius 100–540 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| FL5000 | 16 | 5/8 | 380 | 1520 | 100 | Meter | View FL5000 DN 16 |
| FL5000 | 19 | 3/4 | 380 | 1520 | 120 | Meter | View FL5000 DN 19 |
| FL5000 | 25 | 1 | 350 | 1400 | 150 | Meter | View FL5000 DN 25 |
| FL5000 - 4S | 32 | 1 1/4 | 350 | 1400 | 210 | Meter | View FL5000 - 4S DN 32 |
| FL5000 - 4S | 38 | 1 1/2 | 350 | 1400 | 250 | Meter | View FL5000 - 4S DN 38 |
| FL5000 - 6S | 38 | 1 1/2 | 350 | 1400 | 460 | Meter | View FL5000 - 6S DN 38 |
| FL5000 - 6S | 51 | 2 | 350 | 1400 | 540 | Meter | View FL5000 - 6S DN 51 |
FL6000
Flexible multi-spiral compact hose covering FL6000 and FL6000-6S. Every listed size has 420 bar working pressure and 1680 bar burst pressure.
Standards: Confirm the current manufacturer standard with RHPL.
DN 10–51 mm · 3/8–2 inch · Working pressure 420 bar · Burst pressure 1680 bar · Minimum bend radius 65–540 mm
| Hose type | DN · mm | Size · inch | Working pressure · bar | Burst pressure · bar | Min. bend radius · mm | Unit | Product details |
|---|---|---|---|---|---|---|---|
| FL6000 | 10 | 3/8 | 420 | 1680 | 65 | Meter | View FL6000 DN 10 |
| FL6000 | 12 | 1/2 | 420 | 1680 | 90 | Meter | View FL6000 DN 12 |
| FL6000 | 16 | 5/8 | 420 | 1680 | 100 | Meter | View FL6000 DN 16 |
| FL6000 | 19 | 3/4 | 420 | 1680 | 120 | Meter | View FL6000 DN 19 |
| FL6000 | 25 | 1 | 420 | 1680 | 150 | Meter | View FL6000 DN 25 |
| FL6000-6S | 32 | 1 1/4 | 420 | 1680 | 400 | Meter | View FL6000-6S DN 32 |
| FL6000-6S | 38 | 1 1/2 | 420 | 1680 | 460 | Meter | View FL6000-6S DN 38 |
| FL6000-6S | 51 | 2 | 420 | 1680 | 540 | Meter | View FL6000-6S DN 51 |
Why Semperit through RHPL
Order Semperit hoses through RHPL as an authorised hose distributor. We support technical selection and crimped assembly enquiries, confirming the proposed hose and compatible fittings before supply.
Select against the exact hose size, working pressure and minimum bend radius. Confirm fluid compatibility, operating temperature and the approved hose/fitting combination with RHPL before ordering. Burst pressure is not an operating pressure or a proof-test instruction.
Typical delivery is 4–6 days, confirmed against product, quantity and availability.
Enquire about Semperit hoses Contact RHPLSemperit is a trademark of its owner. RHPL’s Semperit distributor representation here covers hoses.