Semperit Hose Supplier

Semperit 2SN/ SAE 100 R2 DN 19 Hydraulic Hose

Related category: hydraulic hose pipe.

RHPL supplies Semperit 2SN/ SAE 100 R2 DN 19 Hydraulic Hose from Raipur, India. Send your product number or requirement on WhatsApp +91 88717 39555.

Product designation: 2SN/ SAE 100 R2 DN 19 · 3/4 inch

Semperit lists this DN 19, ¾-inch variant in its EN 853 2SN and SAE 100R2 hydraulic hose range. The range uses two high-tensile steel-wire braids and an abrasion-resistant synthetic rubber cover.

Manufacturer source Semperit 2SN manufacturer data.

Technical Information

Hose Type: 2SN/ SAE 100 R2
Nominal Diameter DN (mm): 19
Nominal Size (inch): 3/4
Working Pressure (bar): 215
Burst Pressure (bar): 860
Minimum Bend Radius (mm): 240
Listed Standards: EN 853 · SAE 100R · ISO 1436
Unit of Supply: Meter

Select against the exact hose size, working pressure and minimum bend radius. Confirm fluid compatibility, operating temperature and the approved hose/fitting combination with RHPL before ordering. Burst pressure is not an operating pressure or a proof-test instruction.

Send Your Requirement

Send the hose type, size, required quantity in Meter, operating conditions and delivery destination. For an assembly, include the required connections and measured assembly length.

Typical delivery is 4–6 days, confirmed with your order.

Back to Semperit 2SN / SAE 100 R2

Semperit is a trademark of its owner. RHPL is a supplier of Semperit hoses.

Last updated:

Neighbouring Semperit references. Similar numbers do not establish interchangeability or fitment.

Send the references. We will review the requirement.

One part, a complete kit or a list from Excel—all in one enquiry.

Send Your Part List