SANY Excavator Identification Hose Kits
The SANY excavator entries retain the recorded designations 210 and 220 pending nameplate confirmation. RHPL reviews the complete machine identity together with digging, swing, travel or attachment requests. Do not add an assumed model prefix or generation; the enquiry evidence determines how the record and requested hose scope are clarified.
Machine classes to identify
Begin with identification before comparing the two catalogue entries. Numbers used in an internal or historical record may omit information that appears on the actual machine. Send the readable nameplate and keep any fuller designation supplied by the buyer clearly identified as supporting evidence. Once the unit is understood, separate the hydraulic functions being serviced and connect each requested assembly to the private drawings or reference schedule for that installation.
- Excavator
Recorded catalogue classes: Excavator. These recorded links do not establish kit contents for other classes mentioned in the enquiry guidance.
Hose circuits to check
Use these functions to locate the requested work on your own machine documents. Include a service only where fitted; these checks do not establish a model-specific hose list, construction or technical rating.
- Boom, arm and bucket working lines
- Swing and travel service lines
- Attachment connections where fitted
SANY maintenance: routing and exposure
On the excavator, observe hose paths around the work equipment and other affected areas before dismantling. Identify clamp changes, possible rubbing and the movements that expose the run to contact. Document the surroundings where dust or heat is relevant instead of attaching a general site description to every item. Guards and sleeves need an installation-specific purpose, clear identification and a practical way for maintenance staff to inspect the protected area.
Preparing the SANY replacement scope
A SANY quotation request should show which identity questions remain open and which maintenance functions are already defined. Keep replacement quantities tied to individual references rather than to an assumed complete kit. If two machines are listed as 210, retain separate serial information and attachment details. RHPL can then review the proposed assemblies without treating a short recorded number as evidence of shared geometry, construction or fitment between those units.
Recorded SANY models
2 recorded model enquiries. Entries awaiting designation or kit-scope confirmation remain enquiries; the links are not stock commitments.
All recorded modelsWhat to send for a kit quote
- Machine model and exact variant
- Machine serial number
- Attachments and modifications
- Hose references, drawings or samples
- Item-wise quantity and replacement scope
- Delivery destination
Hose kit enquiry questions
Why are the SANY 210 and 220 designations preserved as recorded?
The nameplate must confirm the complete model text. Preserving the existing record avoids adding a prefix, suffix or generation that has not been established for the machine being serviced.
What should I send for a kit quotation?
Send model, serial number, attachments, drawings or samples, quantities and destination. RHPL clarifies missing details before quoting.
Can two machines listed as 210 use the same kit automatically?
No. Separate serial identities, attachments and references are needed. The short number alone does not establish matching configurations or the same replacement scope.
Can I request supply outside India?
Submit the destination and required documents with your enquiry. Freight, delivery schedule, payment and currency are confirmed in the written offer.
Is RHPL affiliated with or endorsed by SANY?
No. RHPL is independent. The machine name identifies compatibility; fitment and commercial terms are confirmed on enquiry.
SANY is a trademark of its owner. RHPL is not affiliated with or endorsed by SANY. Machine names are used only to identify compatibility.