Semperit 2SN/ SAE 100 R2 DN 38 Hydraulic Hose
Related category: hydraulic hose pipe.
RHPL supplies Semperit 2SN/ SAE 100 R2 DN 38 Hydraulic Hose from Raipur, India. Send your product number or requirement on WhatsApp +91 88717 39555.
Product designation: 2SN/ SAE 100 R2 DN 38 · 1 1/2 inch
Two-wire-braid hydraulic hose. Ratings vary by nominal bore; choose the exact size for your hydraulic circuit.
Technical Information
| Hose Type: | 2SN/ SAE 100 R2 |
|---|---|
| Nominal Diameter DN (mm): | 38 |
| Nominal Size (inch): | 1 1/2 |
| Working Pressure (bar): | 90 |
| Burst Pressure (bar): | 360 |
| Minimum Bend Radius (mm): | 500 |
| Listed Standards: | EN 853 · SAE 100R · ISO 1436 |
| Unit of Supply: | Meter |
Select against the exact hose size, working pressure and minimum bend radius. Confirm fluid compatibility, operating temperature and the approved hose/fitting combination with RHPL before ordering. Burst pressure is not an operating pressure or a proof-test instruction.
Send Your Requirement
Send the hose type, size, required quantity in Meter, operating conditions and delivery destination. For an assembly, include the required connections and measured assembly length.
Typical delivery is 4–6 days, confirmed with your order.
Back to Semperit 2SN / SAE 100 R2Semperit is a trademark of its owner. RHPL is a supplier of Semperit hoses.
Last updated:
Related Part Numbers
Neighbouring Semperit references. Similar numbers do not establish interchangeability or fitment.
