Semperit 210 SEMPERLOADER DN 25 Hydraulic Hose
Product designation: 210 SEMPERLOADER DN 25 · 1 inch
Wire-braided hose listed in DN 25, 1 inch, with a working pressure of 210 bar. Confirm the proposed hydraulic service before supply.
Technical information
| Hose type: | 210 SEMPERLOADER |
|---|---|
| Nominal diameter DN (mm): | 25 |
| Nominal size (inch): | 1 |
| Working pressure (bar): | 210 |
| Burst pressure (bar): | 840 |
| Minimum bend radius (mm): | 150 |
| Unit of supply: | Meter |
Confirm the current manufacturer standard with RHPL.
Select against the exact hose size, working pressure and minimum bend radius. Confirm fluid compatibility, operating temperature and the approved hose/fitting combination with RHPL before ordering. Burst pressure is not an operating pressure or a proof-test instruction.
Send your requirement
Send the hose type, size, required quantity in Meter, operating conditions and delivery destination. For an assembly, include the required connections and measured assembly length.
Typical delivery is 4–6 days, confirmed with your order.
Back to Semperit 210 SemperloaderSemperit is a trademark of its owner. RHPL is an Authorised Semperit Distributor for hoses.