RHPL-OR-0001
Equipment cross-reference: 4J-5267
Also searched as 4J5267
- Inside diameter
- 24.99 mm
- Cross-section
- 3.53 mm
- Reference material
- NBR / Nitrile · 90 Shore A
- Dash size
- 214
RHPL · O-RING SUPPLY REFERENCE
O-Ring RHPL-OR-0005
56.74 mm ID · 3.53 mm cross-section
RHPL part number: RHPL-OR-0005
Caterpillar equipment cross-reference: 4J-0527
Also searched as: 4J0527
Product type: O-Ring
RHPL is an independent supplier and is not affiliated with, sponsored by or an authorised dealer of Caterpillar. The equipment reference identifies the enquiry only; this listing does not offer a genuine OEM product or establish equivalence.
VERIFIED OEM REFERENCE DATA
Technical data
| RHPL part number | RHPL-OR-0005 |
|---|---|
| Equipment cross-reference | 4J-0527 |
| Also searched as | 4J0527 |
| Product type | O-Ring |
| Cross-section | 3.53 mm |
| Inside diameter | 56.74 mm |
| Material | NBR / Nitrile |
| Hardness | 90 Shore A |
| Dash size | 228 |
| Reference brand | Caterpillar |
| Availability | Enquire — confirmed in quotation |
Reference specification only. RHPL confirms the actual supplied product, compound and application in writing.
Technical details
4J-0527 identifies a 56.74 mm inside-diameter ring with a 3.53 mm circular section and dash-size reference 228. The OEM reference lists NBR / Nitrile and 90 Shore A. The dash number does not specify a pressure rating.
Official reference specification ↗ · checked 23 September 2026
Application / identification note
4J0527 is the compact spelling of 4J-0527, not a separate product. Verify the sealing location and gland dimensions. Other rings with the same cross-section in this family have different inside diameters and are not interchangeable on that basis.
Ordering information
Send RHPL part number RHPL-OR-0005, equipment cross-reference 4J-0527, quantity, equipment make/model and serial number if available. Include application, fluid and known seal dimensions. For repeat orders, include the earlier accepted quotation and any changes.
Compatibility confirmation
Compatibility must be confirmed against equipment model, serial number and application before supply. The RHPL code is our catalogue identification, not evidence of OEM manufacture, approval or interchangeability. The listing does not establish a machine-specific fitment or genuine-OEM provenance. The offer identifies the supplied item and accepted specification.
Questions about 4J-0527
Is 4J0527 the same reference?
Yes. Both spellings identify this single 4J-0527 record and canonical page.
What size should I check against my gland?
The listed reference is 56.74 mm ID × 3.53 mm cross-section, dash 228. Confirm the gland, tolerances and actual offered seal before ordering.
Does 90 Shore A establish the working pressure?
No. Clearance, temperature, compound, gland support and service conditions must be assessed together.
Related O-Rings
Other reference sizes; these are not confirmed substitutes.
RHPL-OR-0002
Equipment cross-reference: 4J-0520
Also searched as 4J0520
- Inside diameter
- 32.92 mm
- Cross-section
- 3.53 mm
- Reference material
- NBR / Nitrile · 90 Shore A
- Dash size
- 219
RHPL-OR-0003
Equipment cross-reference: 4J-0522
Also searched as 4J0522
- Inside diameter
- 37.69 mm
- Cross-section
- 3.53 mm
- Reference material
- NBR / Nitrile · 90 Shore A
- Dash size
- 222
RHPL-OR-0004
Equipment cross-reference: 4J-0524
Also searched as 4J0524
- Inside diameter
- 47.22 mm
- Cross-section
- 3.53 mm
- Reference material
- NBR / Nitrile · 90 Shore A
- Dash size
- 225
Related hose and fitting products
Send the reference. Confirm the application.
RHPL is an independent manufacturer and supplier. OEM names and part numbers are used for identification and cross-reference purposes only. Product compatibility is subject to technical confirmation. Third-party trademarks remain the property of their respective owners.