46950001 Gates Chem Master Plus XLPE Industrial Hose
Enquire about Gates 46950001 Chem Master Plus XLPE. Inside diameter (catalogue size): 50.8 mm · 2" in; Outside diameter: 64.5 mm; Working pressure: 13.8 bar · 200 psi. Specification and availability confirmed with your quotation. Raipur Hydraulics, India.
SPECIFICATIONTechnical information
| Inside diameter (catalogue size) | 50.8 mm · 2" in |
|---|---|
| Outside diameter | 64.5 mm |
| Working pressure | 13.8 bar · 200 psi |
| Burst pressure | 55.2 bar · 800 psi |
| Minimum bend radius | 229 mm · 9 in |
| Temperature range | -40 °C to +121 °C (Normal Service) |
| Catalogue edition | Gates India · April 2022 |
| Vacuum (in Hg) | 30 |
| Roll length (m) | 30.5 |
| Temperature applicability | Chemical-dependent; Gates consultation above 52°C. Normal service range is not a blanket rating for every chemical. |
| Catalogue source | Gates Industrial Catalog 2022, page 5 |
Price and current availability are confirmed in the quotation.
Gates Chem Master Plus XLPE: family construction
Tube: Type K (Gatron™ Modified Cross-linked Polyethylene.) Tan. High chemical resistance.
Reinforcement: Synthetic, high tensile textile cord with steel wire helix.
Cover: Type P (EPDM). Black corrugated with orange stripe.
Catalogue applicability for this size
No size-specific standard is asserted here. Check the source family information.
Some source clauses need a size-specific check; refer to the family page and catalogue.
Coupling recommendation: Applicability by size — see family · Open family details
Standards shown apply to the hose. An assembly is limited by its lowest-rated component and must use the manufacturer-approved hose, coupling and crimp combination.
Other sizes in this family
Chemical-dependent temperature rating; consult Gates for chemicals above 52°C or sulfuric acid above 90%. Cleaning: open-end steam at 50 psi or a 10% NaOH bath at 100°C is described; closed-steam cleaning is not recommended.
Enquire about 46950001
Send the reference and quantity for a quotation. Include drawings, photographs or a sample when configuration needs confirmation. RHPL handles domestic and export enquiries; specifications, price, availability and destination freight are agreed before supply.
Request a quotation