GATES CATALOGUE NUMBER
33198997
Without separators33198997
Source catalogue · April 2022
GATES · Hydraulic hoses

Gates 33198997 — 20 G3H hydraulic hose

Two-fibre braid hose for high temperature, low pressure hydraulic oil and glycol antifreeze service.

SPECIFICATION

Technical information

Inside diameter (catalogue size)31.8 mm · 1.25 in
Outside diameter44.5 mm
Working pressure26 bar · 375 psi
Burst pressure103 bar · 1,500 psi
Minimum bend radius254 mm · 10 in
Temperature range-40 °C to +135 °C
Catalogue editionGates India · April 2022
Catalogue sourceGates Hydraulic Catalog 2022, page 28
Manufacturer family illustration — Gates 33198997 — 20 G3H hydraulic hose
ManufacturerGates
Product familyG3H
Designation20 G3H
Unit of enquirymetre
Request price

Price and current availability are confirmed in the quotation.

Normal order lead time is typically 4–6 weeks. Current Gates availability and order-specific schedule are confirmed in the quotation. Freight transit is additional. Shipping details
Ask a technical question
PRODUCT FAQ

Is Gates 33198997 a low-pressure, high-temperature hose?

Yes. Gates 33198997 is 20 G3H, listed for high-temperature, low-pressure hydraulic-oil lines and glycol antifreeze solutions. The catalogue specifies a 1-1/4-inch size, 31.8 mm bore, 26 bar working pressure and a maximum temperature of +135°C. Two yarn braids reinforce the hose, and its minimum bend radius is 254 mm. The coupling entry is unspecified in this catalogue, so a coupling type should not be assumed from the hose number.

Gates Hydraulic Catalog 2022 · April 2022 · PDF page 28
Source checked . Specifications refer to the cited source.

Gates G3H: family construction

Tube: Black, synthetic rubber (Nitrile).

Reinforcement: Two braids of high tenacity yarn.

Cover: Black, oil & abrasion resistant, synthetic rubber (Polychloroprene)

Catalogue applicability for this size

  • SAE 100R3
  • EN 854 R3

Coupling recommendation: Applicability by size — see family · Open family details

Standards shown apply to the hose. An assembly is limited by its lowest-rated component and must use the manufacturer-approved hose, coupling and crimp combination.

Other sizes in this family

Catalogue component values are edition-specific. Burst pressure is not working pressure. Hose and coupling selection must follow the current approved combination and assembly instructions. Product identification policy.

Found the hose family you need?

Send the catalogue number, quantity and any assembly requirements.

Enquire about this range