Gates 33198950 — 4 C3 hydraulic hose
Two-fibre braid hose for hydraulic oil lines, water and antifreeze solutions.
SPECIFICATIONTechnical information
| Inside diameter (catalogue size) | 6.4 mm · 0.25 in |
|---|---|
| Outside diameter | 14.5 mm |
| Working pressure | 86 bar · 1,250 psi |
| Burst pressure | 345 bar · 5,000 psi |
| Minimum bend radius | 76.2 mm · 3 in |
| Temperature range | -40 °C to +100 °C |
| Catalogue edition | Gates India · April 2022 |
| Catalogue source | Gates Hydraulic Catalog 2022, page 28 |
Price and current availability are confirmed in the quotation.
What does Gates 33198950 C3 hose carry?
Gates 33198950 identifies 4 C3, a nominal 1/4-inch hose for hydraulic oil, water and antifreeze solutions. The construction uses a nitrile tube and two synthetic textile-yarn braids. For this size, Gates lists a 6.4 mm bore, 86 bar working pressure and a 76.2 mm minimum bend radius. The operating temperature range is -40°C to +100°C; the hose code does not determine the required end fittings or assembly length.
Gates Hydraulic Catalog 2022 · April 2022 · PDF page 28
Source checked . Specifications refer to the cited source.
Gates C3: family construction
Tube: Black, synthetic rubber (Nitrile).
Reinforcement: Two braid of high tenacity synthetic textile yarn.
Cover: Black, oil & abrasion resistant synthetic rubber (Modified Nitrile)
Catalogue applicability for this size
- SAE 100R3
- EN 854 R3
Coupling recommendation: Applicability by size — see family · Open family details
Standards shown apply to the hose. An assembly is limited by its lowest-rated component and must use the manufacturer-approved hose, coupling and crimp combination.