Gates 32012665 — 32 PNEUMATIC HOSE industrial hose
Hose for industrial pneumatic tools, compressed air and construction work. Reinforcement and cover materials vary by size.
SPECIFICATIONTechnical information
| Inside diameter (catalogue size) | 50.8 mm · 2" in |
|---|---|
| Outside diameter | 60.8 mm |
| Working pressure | 14 bar · 200 psi |
| Burst pressure | 55 bar · 800 psi |
| Minimum bend radius | 305 mm · 12 in |
| Temperature range | -30 °C to +82 °C |
| Catalogue edition | Gates India · April 2022 |
| Vacuum (in Hg) | 10 |
| Roll length (m) | Min & Max 30 |
| Catalogue source | Gates Industrial Catalog 2022, page 10 |
Price and current availability are confirmed in the quotation.
Gates Pneumatic Greenline: family construction
Tube: Modified Nitrile Rubber, Black
Reinforcement: Single braid of high tenacity synthetic yarn from sizes 1/4” mm to 1”, single braid of high tensile brass coated Steel wire from sizes 1 1/4” mm to 2”.
Cover: Specially compounded high abrasion resistant nitrile rubber for sizes 1/4” to 3/4” [Black]. Highly abrasion resistant modified natural rubber for sizes 1” and above [Black].
Catalogue applicability for this size
No size-specific standard is asserted here. Check the source family information.
Some source clauses need a size-specific check; refer to the family page and catalogue.
Coupling recommendation: Applicability by size — see family · Open family details
Standards shown apply to the hose. An assembly is limited by its lowest-rated component and must use the manufacturer-approved hose, coupling and crimp combination.