Gates 32012615 — 16 CARBON FREE HOSE industrial hose
Carbon-free hose for furnace coolant lines in the electrical steel industry and other applications requiring low leakage current.
SPECIFICATIONTechnical information
| Inside diameter (catalogue size) | 26.3 mm · 1" in |
|---|---|
| Outside diameter | 37.5 mm |
| Working pressure | 17.2 bar · 250 psi |
| Burst pressure | 69 bar · 1,000 psi |
| Minimum bend radius | 152 mm · 6 in |
| Temperature range | -40 °C to +95 °C |
| Catalogue edition | Gates India · April 2022 |
| Vacuum (in Hg) | 25 |
| Catalogue source | Gates Industrial Catalog 2022, page 13 |
Price and current availability are confirmed in the quotation.
What operating details apply to Gates 32012615 furnace hose?
Gates 32012615 identifies the nominal 1-inch Carbon Free hose for specialised furnace cooling and other non-conductive applications. The catalogue lists a 26.3 mm bore, 37.5 mm outside diameter, 17.2 bar working pressure and a 152 mm minimum bend radius. It uses single-yarn-braid reinforcement with a grey tube and green cover. The temperature range is -40°C to +95°C; the exact coolant, connection design and required electrical performance must match the installation.
Gates Industrial Catalog 2022 · April 2022 · PDF page 13
Source checked . Specifications refer to the cited source.
Gates Carbon Free: family construction
Tube: Modified synthetic Rubber, Grey
Reinforcement: Single braid high tenacity synthetic yarn for (3/8” to 1”) sizes. Double braid, high tenacity synthetic yarn for 1 1/4” & above sizes.
Cover: Specially compounded Nitrile, Gréen
Catalogue applicability for this size
No size-specific standard is asserted here. Check the source family information.
Some source clauses need a size-specific check; refer to the family page and catalogue.
Coupling recommendation: Applicability by size — see family · Open family details
Standards shown apply to the hose. An assembly is limited by its lowest-rated component and must use the manufacturer-approved hose, coupling and crimp combination.