Manufacturer catalogue illustration; use the part-specific table for dimensions. Individual size and markings may differ.
Danfoss WHR18 hose supplied by Raipur Hydraulics. Review the listed size and technical details below.
Identification
Manufacturer brand:
Danfoss
Part number:
WHR18-10
Family:
WHR18
Unit of supply:
Meter
Delivery:
Typically 4–6 days; confirmed against quantity and availability
Confirm the current manufacturer specification, fluid compatibility, operating conditions and approved hose/coupling combination before ordering. Hose working pressure does not independently establish the finished assembly rating.
Technical information
Hose DN:
16
Inside diameter (mm):
15.9
Inside diameter (in):
0.63
Outside diameter (mm):
27.0
Outside diameter (in):
1.06
Working pressure (bar):
210
Working pressure (psi):
3045
Burst pressure (bar):
840
Burst pressure (psi):
12180
Minimum bend radius (mm):
102
Minimum bend radius (in):
4.00
Weight (kg/m):
0.41
Weight (lb/ft):
0.28
Listed standard / performance:
SAE 100R18
Tube:
Polimeric core tube
Reinforcement:
2 or 3-textile Braids
Cover:
Perforated Polyurethane
Operating temperature:
-40°C to +93°C (-40°F to +200°F)
Compatible fitting series (listed):
Two-piece Winner
Selection note:
Temperature shown follows the operating-temperature section; the illustrated layline example differs. Confirm the current specification before selection.
Dimensions and ratings are listed values. Where source fields conflict, the affected value is withheld for technical confirmation.
Danfoss, Winner and Aeroquip are third-party trademarks used to identify the products. RHPL supplies these products; current specification and supply terms are confirmed in the quotation.
Send the references. We will review the requirement.
One part, a complete kit or a list from Excel—all in one enquiry.
