Danfoss · Manufacturer Catalogue Reference

WH004-40 Danfoss Hydraulic Hose

Related category: hydraulic hose pipe.

RHPL supplies WH004-40 Danfoss Hydraulic Hose from Raipur, India. Send your product number or requirement on WhatsApp +91 88717 39555.

Part number WH004-40

Also searched as: WH00440 · WH004 40

WH004 manufacturer catalogue illustration
Manufacturer catalogue illustration; use the part-specific table for dimensions. Individual size and markings may differ.

Danfoss WH004 hose supplied by Raipur Hydraulics. Review the listed size and technical details below.

Identification

Manufacturer Brand: Danfoss
Part Number: WH004-40
Family: WH004
Unit of Supply: Meter
Delivery: Typically 4–6 days; confirmed against quantity and availability

Confirm the current manufacturer specification, fluid compatibility, operating conditions and approved hose/coupling combination before ordering. Hose working pressure does not independently establish the finished assembly rating.

Technical Information

Outside Diameter (mm): 76.7
Outside Diameter (In): 3.02
Working Pressure (bar): 4
Working Pressure (psi): 60
Minimum Bend Radius (mm): 140
Minimum Bend Radius (In): 5.51
Vacuum (kPa): 94.8
Vacuum (in Hg): 28
Weight (kg/m): 2.05
Weight (Lb/ft): 1.38
Supply note: Bulk only (manufacturer footnote)
Technical confirmation: Conflicting printed values withheld: Inside diameter (mm), Inside diameter (in), Burst pressure (bar), Burst pressure (psi). Ask RHPL to confirm the current manufacturer specification.
Listed standard / performance: SAE 100R4
Tube: Oil resistant NBR
Reinforcement: Textile with helical and anti-static wire
Cover: Abrasion Resistant Synthetic rubber
Operating temperature: -40º C to +100º C (-40º to +212º F)
Compatible fitting series (listed): 1A and 1G and 2 pieces: (-12, 16, -20, -24, -32)

Dimensions and ratings are listed values. Where source fields conflict, the affected value is withheld for technical confirmation.

Send Your Requirement

  • Exact part number and quantity
  • Required unit of supply
  • Operating fluid, temperature and pressure
  • Hose ends and assembly length, if an assembly is required
  • Delivery destination
Back to WH004

Danfoss, Winner and Aeroquip are third-party trademarks used to identify the products. RHPL supplies these products; current specification and supply terms are confirmed in the quotation.

Last updated:

Neighbouring Danfoss references. Similar numbers do not establish interchangeability or fitment.

Send the references. We will review the requirement.

One part, a complete kit or a list from Excel—all in one enquiry.

Send Your Part List