GH195-16 Danfoss Hydraulic Hose
Related category: hydraulic hose pipe.
RHPL supplies GH195-16 Danfoss Hydraulic Hose from Raipur, India. Send your product number or requirement on WhatsApp +91 88717 39555.
Also searched as: GH19516 · GH195 16

Danfoss GH195 hose supplied by Raipur Hydraulics. Review the listed size and technical details below.
Identification
| Manufacturer Brand: | Danfoss |
|---|---|
| Part Number: | GH195-16 |
| Family: | GH195 |
| Unit of Supply: | Feet |
| Delivery: | Typically 4–6 days; confirmed against quantity and availability |
Confirm the current manufacturer specification, fluid compatibility, operating conditions and approved hose/coupling combination before ordering. Hose working pressure does not independently establish the finished assembly rating.
Technical Information
| Inside Diameter (mm): | 25.4 |
|---|---|
| Inside Diameter (In): | 1 |
| Outside Diameter (mm): | 37.9 |
| Outside Diameter (In): | 1.49 |
| Working Pressure (bar): | 175 |
| Working Pressure (psi): | 2550 |
| Minimum Bend Radius (mm): | 300.0 |
| Minimum Bend Radius (In): | 11.81 |
| Tube: | AQP elastomer |
| Reinforcement: | 2 steel wire braids |
| Cover: | Blue AQP elastomer |
| Listed standard / performance: | SAE 100R2AT Type S / EN 853 2SN / ISO 1436-1 Type 2SN |
| Temperature Range: | -40 °C to +150 °C |
| Listed approval: | MSHA listed in supplied material; current approval scope confirmed on enquiry |
Dimensions and ratings are listed values. Where source fields conflict, the affected value is withheld for technical confirmation.
Send Your Requirement
- Exact part number and quantity
- Required unit of supply
- Operating fluid, temperature and pressure
- Hose ends and assembly length, if an assembly is required
- Delivery destination
Danfoss, Winner and Aeroquip are third-party trademarks used to identify the products. RHPL supplies these products; current specification and supply terms are confirmed in the quotation.
Last updated:
Related Part Numbers
Neighbouring Danfoss references. Similar numbers do not establish interchangeability or fitment.
