DANFOSS · MANUFACTURER CATALOGUE REFERENCE
FC689-12 Danfoss Hydraulic Hose
Part number FC689-12
Also searched as: FC68912 · FC689 12
Danfoss FC689 hose supplied by Raipur Hydraulics. Review the listed size and technical details below.
Identification
| Manufacturer brand: | Danfoss |
|---|---|
| Part number: | FC689-12 |
| Family: | FC689 |
| Unit of supply: | Meter |
| Delivery: | Typically 4–6 days; confirmed against quantity and availability |
Confirm the current manufacturer specification, fluid compatibility, operating conditions and approved hose/coupling combination before ordering. Hose working pressure does not independently establish the finished assembly rating.
Technical information
| Inside diameter (mm): | 19.0 |
|---|---|
| Inside diameter (in): | 0.75 |
| Outside diameter (mm): | 30.1 |
| Outside diameter (in): | 1.19 |
| Working pressure (bar): | 215 |
| Working pressure (psi): | 3125 |
| Minimum bend radius (mm): | 240.0 |
| Minimum bend radius (in): | 9.45 |
| Tube: | Synthetic rubber |
| Reinforcement: | Wire braid; construction to be confirmed |
| Cover: | Black synthetic rubber |
| Listed standard / performance: | EN 853 2SN |
| Temperature range: | -40 °C to +100 °C |
| Listed approval: | MSHA listed in supplied material; current approval scope confirmed on enquiry |
Dimensions and ratings are listed values. Where source fields conflict, the affected value is withheld for technical confirmation.
Send your requirement
- Exact part number and quantity
- Required unit of supply
- Operating fluid, temperature and pressure
- Hose ends and assembly length, if an assembly is required
- Delivery destination
Danfoss, Winner and Aeroquip are third-party trademarks used to identify the products. RHPL supplies these products; current specification and supply terms are confirmed in the quotation.