1T8FHA10 Danfoss Hydraulic Fitting
Related category: hydraulic hose fittings.
RHPL supplies 1T8FHA10 Danfoss Hydraulic Fitting from Raipur, India. Send your product number or requirement on WhatsApp +91 88717 39555.
Also searched as: 1T8FHA10 · 1T8FHA10

Danfoss 1T / 4S / 6S fitting series Code 62 flange 45° elbow fitting. Dimensions shown are the manufacturer-listed values for 1T8FHA10.
Identification
| Manufacturer Brand: | Danfoss |
|---|---|
| Part Number: | 1T8FHA10 |
| Family: | 1T |
| Unit of Supply: | EA |
| Delivery: | Typically 4–6 days; confirmed against quantity and availability |
Confirm the current manufacturer specification, fluid compatibility, operating conditions and approved hose/coupling combination before ordering. Hose working pressure does not independently establish the finished assembly rating.
Technical Information
| Fitting system: | 1T / 4S / 6S fitting series |
|---|---|
| Connection: | Code 62 flange |
| End form: | 45° elbow |
| Fitting series: | 1T |
| Terminal end dash size: | -8 |
| Hose DN: | 16 |
| Hose dash size: | -10 |
| K flange diameter (mm): | 31.8 |
| K flange diameter (in): | 1.25 |
| A (mm): | 94.1 |
| A (in): | 3.71 |
| D cut-off factor (mm): | 57.5 |
| D cut-off factor (in): | 2.27 |
| E bore (mm): | 12 |
| E bore (in): | 0.47 |
| H (mm): | 21.3 |
| H (in): | 0.84 |
Dimensions and ratings are listed values. Where source fields conflict, the affected value is withheld for technical confirmation.
Send Your Requirement
- Exact part number and quantity
- Required unit of supply
- Operating fluid, temperature and pressure
- Hose ends and assembly length, if an assembly is required
- Delivery destination
Danfoss, Winner and Aeroquip are third-party trademarks used to identify the products. RHPL supplies these products; current specification and supply terms are confirmed in the quotation.
Last updated:
Related Part Numbers
Neighbouring Danfoss references. Similar numbers do not establish interchangeability or fitment.
