1T8EK6 Danfoss Hydraulic Fitting
Related category: hydraulic hose fittings.
RHPL supplies 1T8EK6 Danfoss Hydraulic Fitting from Raipur, India. Send your product number or requirement on WhatsApp +91 88717 39555.
Also searched as: 1T8EK6 · 1T8EK6

Danfoss 1T / 4S / 6S fitting series DIN 24° DKO Heavy male rigid fitting. Dimensions shown are the manufacturer-listed values for 1T8EK6.
Identification
| Manufacturer Brand: | Danfoss |
|---|---|
| Part Number: | 1T8EK6 |
| Family: | 1T |
| Unit of Supply: | EA |
| Delivery: | Typically 4–6 days; confirmed against quantity and availability |
Confirm the current manufacturer specification, fluid compatibility, operating conditions and approved hose/coupling combination before ordering. Hose working pressure does not independently establish the finished assembly rating.
Technical Information
| Fitting system: | 1T / 4S / 6S fitting series |
|---|---|
| Connection: | DIN 24° DKO Heavy |
| End form: | Male rigid |
| Fitting series: | 1T |
| Terminal end size: | 12S |
| Hose DN: | 10 |
| Hose dash size: | -6 |
| Thread: | M20X1,5 |
| A (mm): | 54 |
| A (in): | 2.13 |
| D cut-off factor (mm): | 24.5 |
| D cut-off factor (in): | 0.97 |
| E bore (mm): | 6.5 |
| E bore (in): | 0.26 |
| Hex 1 (mm): | 22 |
Dimensions and ratings are listed values. Where source fields conflict, the affected value is withheld for technical confirmation.
Send Your Requirement
- Exact part number and quantity
- Required unit of supply
- Operating fluid, temperature and pressure
- Hose ends and assembly length, if an assembly is required
- Delivery destination
Danfoss, Winner and Aeroquip are third-party trademarks used to identify the products. RHPL supplies these products; current specification and supply terms are confirmed in the quotation.
Last updated:
Related Part Numbers
Neighbouring Danfoss references. Similar numbers do not establish interchangeability or fitment.
